d-coax logousa flag

D-COAX, INC. • P.O. Box 999
Newberg, Oregon 97132  USA
Ph: 503-922-2436 • Fax: 503-376-8237
info@d-coax.com

Equipping engineers with solutions and products for their success.

COMPANY NEWS & COMING EVENTS

DesignCon Conference anD Expo

Press Release NEWBERG, OR January 12, 2020
design con 2020 logo

D-OAX will exhibit at DesignCon 2020 at booth T15.  Come to visit us to see our new products. The show runs for January 28–30, 2020 in Santa Clara, CA.  Read more about the show here.
www.designcon.com

NW Electronics Design & Manufacturing Expo

Press Release NEWBERG, OR October 2, 2019

D-COAX will exhibit their products and services, including some new products at the NW Electronics Design & Manufacturing Expo/OctoberBest, NEDME show. Everyone is invited. Stop by booth G103 and talk to us, drop off your business card for the raffle.  D-Coax will have a drawings at 11:00am, 2:00pm and 3:00pm, participant must be present at the time of drawing to win!

Admission: 5 or more non-perishable food items or $5.00 per person at the door.
All proceeds go to Oregon Food Bank.

When: October 2, 2019
Where: Tektronix, Inc.
3025 SW Zworykin Ave, Bldg. #38
Beaverton, OR 97005
www.octoberbest.com/

SMP to 2.92mm ≤ 1ps Skew Matched, Phase Stable Cable Assemblies

Newberg, OR July 6, 2018
skew matched phase stable high performance coaxial cable assembly

D-COAX, Inc. has introduced a ≤ 1ps skew matched and phase stable high performance 0.096-inch (0.086-inch replacement) flexible SMP to 2.92mm coaxial cable assemblies through 40GHz.

The standard assemblies deliver excellent return loss and low insertion loss.

Cable pairs are ideal for:
  • Signal Integrity
  • Channel Modeling
  • Jitter Measurements
  • BERT
  • Differential Measurements
  • VNA Measurements
  • Replacement for semi-rigid cable

Male - Female 2.92mm ≤ 1ps Skew Matched, Phase Stable Cable Assemblies

Newberg, OR July 6, 2018
skew matched phase stable hight performance coaxial cable assembly

D-COAX, Inc. has introduced a ≤ 1ps skew matched and phase stable high performance 0.150-inch flexible Male 2.92mm to Female 2.92mm coaxial cable assemblies through 40GHz.The standard assemblies deliver excellent return loss and low insertion loss.

Cable pairs are ideal for:
  • Signal Integrity
  • Channel Modeling
  • Jitter Measurements
  • BERT
  • Differential Measurements
  • VNA Measurements
  • Replacement for semi-rigid cable
phase stability, amplitude stability chart

DesignCon Conference and Expo

Press Release NEWBERG, OR November 14, 2017
design con 2018 logo

D-COAX will exhibit at DesignCon 2018 at booth T6. Come to visit us to see our new products.
The show runs from Jan 30- Feb 1 in Santa Clara, CA. Read more about the show here: www.designcon.com

≤ 1ps Skew Matched, Phase Stable Cable Assemblies, d086 Series

NEWBERG, Oregon January 25, 2017
skew matched phase stable high performance flexible coaxial cable assembly

D-COAX, Inc. has introduced ≤ 1ps skew matched and phase stable high performance flexible coaxial cable assemblies through 65GHz.The standard assemblies deliver excellent return loss and low insertion loss.

Cable Pairs are ideal for:
•Signal Integrity
•Channel Modeling
•Jitter Measurements
•BERT
•Differential Measurements
•VNA measurement
•Replacement for semi-rigid cable

phase stability, amplitude stability chart

DesignCon Conference and Expo

Press Release NEWBERG, OR January 25, 2017
design con 2017 logo

D-COAX will exhibit at DesignCon 2017 at booth T5.Come to visit us to see our new products. The show is next week, Jan 31- Feb 2 in Santa Clara, CA. See more information on the show at http://www.designcon.com/santaclara/expo

≤ 1ps Skew Matched, Phase Stable Cable Assemblies, d047 Series

NEWBERG, Oregon January 17, 2017
skew matched, phase stable high performance flexible coaxial cable assembly

D-COAX, Inc. has introduced ≤ 1ps skew matched, phase stable and high performance 0.060-inch (0.047-inch replacement) flexible coaxial cable assemblies through 40GHz. The new type of bend relief, “free-bend”, allows for tighter bends.  Low weight cable assemblies reduce the moment-arm force in delicate probing applications and overall weight of the test setup.

The standard assemblies deliver excellent return loss and low insertion loss.

Cable Pairs are ideal for:
• Signal Integrity
• Channel Modeling
• Jitter Measurements
• BERT
• Differential Measurements
• VNA measurements
• Replacement for semi-rigid cable

phase stability, amplitude stability chart

Probe Station, configurable probe positions

NEWBERG, Oregon December 10, 2015
model w4.0 x L6.5 probe

D-COAX, Inc. has introduced a reconfigurable probe station for testing a wide range of devices with many types of probes.  The probe holders can be moved and adjusted for short to tall devices and for probes that need to be positioned at an angle or with orthogonal layouts.

Testing can be done in front of the instrumentation because of a small foot print and allows shorter test cables to be used and more bench space for high performance equipment set-ups. TDR, VNA, 4-wire Probes work well with this probe station on wafers and small package devices because a combination of adjustability of the coarse and fine movements in X, Y, Z directions.  The Model W4.0 X L6.5 probe station has a Z movement digital readout for repeatable probe touch-downs and a vacuum chuck for wafers or other devices.

1.4 mm Pitch High Frequency Coaxial, Differential PCB Probe (40 GHz)

NEWBERG, Oregon December 7, 2015

The DP1.4 Differential probe by D-COAX is used for high frequency PCB differential impedance characterization or high-speed differential or single-ended electrical signal analysis and is an excellent and affordable solution.  The probe is mounted on the compact rigid holding fixture that can be configured in two positions: horizontal position for nulling out probe-to-probe or testing and the vertical position for de-embedding the probe and testing.   This compact configuration is designed for PCB boards or direct probing of Twinax or Coaxial cable. Because the probe uses un-coupled 50 ohm semi-rigid for each channel, differential or single-ended measurements are possible.  High accuracy measurement are obtained by having low contact resistance and impedance control of the probe throughout all transitions.

NW Electronics Design & Manufacturing Expo

Press Release NEWBERG, OR September 19, 2015

D-COAX will exhibit their products and services, including some new products like differential probes and skew matched phase stable cable pairs at the NW Electronics Design & Manufacturing Expo/OctoberBest, NEDME show. Everyone is invited. Come see us at booth G103.  

When: October 7, 2015
Where: Tektronix, Inc.3025 SW Zworykin Ave, Bldg. #38
Beaverton, OR 97005
www.octoberbest.com/

october best chart

High Performance Cable Assemblies with Free Data Included for Modeling

NEWBERG, Oregon May 06, 2015
cable assemblies

D-COAX, Inc. has announced that all purchased cable assemblies include free electrical data.  All D-COAX cable assemblies are 100% tested using VNA and include s2p, tab, and bmp files.  High performance flexible coaxial cable assemblies are available through 65GHz in singles and cable pairs. The standard assemblies deliver excellent return loss and low insertion loss.  D-COAX has also added a “live chat” feature to help with questions real time.

These cable assemblies are ideal for:
• Signal Integrity
• Chanel Modeling
• Jitter Measurements
• BERT
• Differential Measurements
• VNA measurements
• Replacement for semi-rigid cable

High Frequency PCB Probe (44 GHz)

NEWBERG, Oregon April 20, 2015

D-COAX, Inc. has introduced high performance TDR – VNA Probe assemblies through 44GHz in the 2 configurations in the greater metropolitan area of Portland Oregon.

Testing for small discontinuities on non-planar PCBs is now possible on a 40GHz VNA or very fast TDR because of the durable and repeatable probe design.

The probes deliver excellent uncorrected return loss and low insertion loss.  The OmniJet probe 40 GHz insertion loss is better than -1.5dB and the return loss is better than -10.0dB at 40GHz.

≤ 1ps Skew Matched, Phase Stable Cable Assemblies

NEWBERG, Oregon March 09, 2015
skew matched, phase stable high performance flexible coaxial cable assemblies

D-COAX, Inc. has introduced ≤ 1ps skew matched and phase stable high performance flexible coaxial cable assemblies through 65GHz.The standard assemblies deliver excellent return loss and low insertion loss.Cable

Pairs are ideal for:
• Signal Integrity
• Chanel Modeling
• Jitter Measurements
• BERT
• Differential Measurements
• VNA measurements
• Replacement for semi-rigid cable

phase stability, amplitude stability chart

NW Electronics Design & Manufacturing Expo

Press Release NEWBERG, Oregon September 23, 2014
october best chart

D-COAX will exhibit their products and services, including some new products like TDR probe and Hand Held Probe Holder at NW Electronics Design & Manufacturing Expo/OctoberBest seminar and trade show. Everyone is invited. Come and see us at booth J107.

When: October 1, 2014
Where: Tektronix, Inc.
3025 SW Zworykin Ave, Bldg. #38
Beaverton, OR 97005
www.octoberbest.com/

Testing and Engineering Services, VNA, TDR

NEWBERG, Oregon June 1, 2014

D-COAX has introduced Testing and Engineering Services business segment to assist their customers with design, prototyping and production of the microwave interconnects.  Tests Services include characterization or production testing in the Time Domain and Frequency Domain up to 65GHz. Engineering Services include designing, machining, and building product prototypes, RF/Microwave test fixtures, calibration kits and other custom microwave structures.  D-COAX has a tool-room quality machine shop onsite for rapid prototyping and quick project turn around. Located in the greater metropolitan area of Portland Oregon.

Website Has Been Redesigned

NEWBERG, Oregon May 1, 2014

D-COAX just launched a completely redesigned website with a new fresher and cleaner look.  The new website features its new capabilities, as well as, the addition of new products and services and an online store.  It has been designed to create a user-friendly experience with improved navigation that includes detailed drop-down menus, responsive design, valuable information about products and services and the latest company news.

Our New Products page features a new portable mini probe station and high performance semi-rigid and flexible cable assemblies up to 65GHz.  Standard cable assemblies can be purchased via the online store and custom cable assemblies can be quoted via the user-friendly Cable Builder tool. The new website also features a new Test Services page which includes test services, engineering services, consulting information, and rates.

Thank you for reading, and please enjoy the fresh new content.  There is much more to come!

Cable Builder Tool

NEWBERG, Oregon May 1, 2014

D-COAX has recently launched a new Cable Builder tool which can be accessed from the Semi-Rigid or Flexible Assemblies pages under the Products page. The Cable Builder tool guides the customer through the process of specifying the assembly’s desired performance, as well as, dimensional specifications. The customer can also upload the specification drawing instead of filing out the specification fields in the Cable Builder tool.  After completing the form just hit submit and one of our trained staff members will contact you with the information you requested.

Back to Top